Support / Installation & activation

Installing and running Nolvra CLINCH

Install CLINCH on Mac or Windows, activate it, route a sidechain, and remove it again.

What you need

Nolvra CLINCH is a VCA bus compressor. It runs as VST3 and Audio Unit on macOS 11 or later, natively on Apple Silicon Macs, and as a 64-bit VST3 on Windows 10 or 11. There is no AAX version. Signing in to Nolvra Hub with All-Access, or a CLINCH license key, is required to use the plug-in.

Installing on a Mac

Install from the Hub

Sign in to Nolvra Hub and install CLINCH from the product list; the Hub installs it and keeps it updated. The package puts the VST3, the Audio Unit and CLINCH's interface images into your own user folders, so it does not ask for an administrator password.

Rescan in your DAW

Your DAW caches its plugin list. Rescan plug-ins in your DAW to pick CLINCH up, or restart the host.

Where the Mac installer puts CLINCH

  • VST3~/Library/Audio/Plug-Ins/VST3/Nolvra CLINCH.vst3
  • Audio Unit~/Library/Audio/Plug-Ins/Components/Nolvra CLINCH.component
  • Interface images~/Library/Application Support/Nolvra/CLINCH/CLINCH_UI
  • License texts~/Library/Application Support/Nolvra/CLINCH/Licenses

Installing on Windows

Install from the Hub

CLINCH needs Windows 10 or 11 (64-bit). Sign in to Nolvra Hub and install CLINCH from the product list, the same way as on a Mac. Windows asks for administrator rights once, because the VST3 goes into the shared VST3 folder.

Rescan in your DAW

Nolvra CLINCH is installed. If your host is open, close it and rescan plug-ins.

Where the Windows setup puts CLINCH

  • VST3C:\Program Files\Common Files\VST3\Nolvra CLINCH.vst3
  • License textsC:\Program Files\Nolvra\CLINCH

License

When CLINCH opens without a license it shows the activation screen over its window. All-Access members need no key: open Nolvra Hub and sign in. If you bought CLINCH on its own, type your license key into the field under BOUGHT CLINCH ON ITS OWN? and press ACTIVATE while you are online; you can find the key in Nolvra Hub under Licenses. The key looks like CLINCH-XXXX-XXXX-XXXX and activates on two machines. The 7-day trial opens CLINCH the way a membership does, with no card and no separate activation step.

Messages you may see

  • License key not found. Check for typos.
  • Activation limit reached. Contact support to move a device.
  • This device was deactivated in Nolvra Hub. Contact support to move a device.
  • Sign in to Nolvra Hub to confirm your All-Access membership.
  • No CLINCH license on this account.
  • CLINCH is not included in your current plan.
  • Couldn't reach Nolvra servers. Check your connection.

Sidechain and NO SIDECHAIN INPUT

CLINCH has a second, stereo input for a sidechain; a mono source is used on both sides. It is off until you use it. Route the triggering track to CLINCH's sidechain input in your DAW, then turn on EXT S/C on CLINCH's screen: from then on the detector listens only to that input. If nothing arrives there, the EXT S/C lamp blinks and the screen reads NO SIDECHAIN INPUT, and CLINCH does not compress. In Logic Pro and Ableton Live the warning shows about half a second after EXT S/C goes on, and again whenever the routed track stays silent for half a second. It clears as soon as signal arrives and changes nothing in the sound. In Logic Pro, choose the source in the Side Chain menu at the top of the plug-in window. In Ableton Live, choose it in the Sidechain menu of CLINCH's device; set that track's output to Sends Only if you want to hear it only as the trigger.

Switching CLINCH on and off in Logic Pro

To switch CLINCH in and out without a click in Logic Pro, use CLINCH's own POWER button rather than Logic's bypass. POWER fades the change, and the signal passes through untouched at the same latency while it is off. Logic's bypass cuts the plug-in in and out at once, which you can hear as a click on a compressed bus.

LISTEN

LISTEN plays what the detector hears instead of your track: the signal after S/C HPF, S/C LPF and the bell. With EXT S/C off that is your own track, filtered; with EXT S/C on it is the sidechain input, so with nothing routed you hear silence. The compressor keeps working while you listen, OUTPUT does not change the LISTEN level, and switching LISTEN while audio plays does not click. Turn it off before you print.

Latency

QUALITY sets the oversampling and with it the latency: none at 1x, 35 samples at 2x (the default), 41 at 4x and 44 at 8x. CLINCH reports it to your host, which compensates. Presets do not change QUALITY; set it before you print.

CLINCH does not appear in my DAW

Rescan your plugins

Symptom: the installer finished and CLINCH is nowhere in the browser. Cause: your DAW cached its plugin list before the install. Fix: rescan in your host's plugin manager, or restart the host.

Check your system version

Symptom: CLINCH is missing on an older Mac or PC. Cause: CLINCH needs macOS 11 or later, or Windows 10 or 11 (64-bit). Fix: update the system.

Check which format your host wants

Symptom: the host lists other plug-ins but not CLINCH. Cause: Logic and GarageBand load only Audio Units; on Windows only VST3 is installed; Pro Tools needs AAX, which CLINCH does not have. Fix: look for the format your host loads.

Check the folder your host scans

Symptom: the host scans a custom folder. Cause: on a Mac CLINCH installs into your user Library, not the system one. Fix: add ~/Library/Audio/Plug-Ins/VST3 to the host's scan list, or on Windows C:\Program Files\Common Files\VST3.

Audio Unit validation in Logic

Logic validates every Audio Unit before it shows it. If CLINCH is marked as failed, open Logic's Plug-in Manager, select Nolvra CLINCH and choose Reset & Rescan Selection. To check it yourself in Terminal: auval -v aufx Ncnh Nlvr

Presets

CLINCH's 48 factory presets and DEFAULT are built into the plug-in. Your own presets are .clinchpreset files in the Nolvra/CLINCH/Presets folder of your Documents folder; FOLDER in the library opens it. Copy that folder to take them to another computer, or use IMPORT PRESET in the menu at the top left to bring a single file in.

Removing CLINCH

On a Mac

There is no uninstaller. Quit your DAW and delete Nolvra CLINCH.vst3 from ~/Library/Audio/Plug-Ins/VST3 and Nolvra CLINCH.component from ~/Library/Audio/Plug-Ins/Components. The folder ~/Library/Application Support/Nolvra/CLINCH holds the interface images and the license texts; delete it too if you want nothing left. Your own presets stay in Documents until you delete them.

On Windows

Open Settings, Apps, find Nolvra CLINCH and choose Uninstall. The uninstaller removes the VST3. Your settings in %APPDATA%\Nolvra\CLINCH and your own presets in Documents stay; delete them too if you want nothing left.

What not to delete

The files directly inside ~/Library/Application Support/Nolvra or %APPDATA%\Nolvra belong to Nolvra Hub and your other Nolvra plug-ins.

What to send us

If none of this works, write to support@nolvra.com with your operating system and its version, your host and its version, and a screenshot of the plugin manager entry. Do not send your license key.

Still stuck?

Nothing here matching? Write to a person.